Parker Hydraulic Motor TG TB TE TC TJ TF TH TL BG BH DF DG TF TGK TK TS Hydraulic Motor Suppliers in Ahmedabad Mumbai Chennai Bangalore Hyderabad Nashik Pune Indore Jaipur Delhi Haryana Kolkata Vasai Thane Navi Mumbai Nagpur Rajkot Surat India
Parker’s low speed, high torque gerotor (LSHT) motors do not require a case drain line, which reduces the amount of hose and fitting required to minimize bill of material expenditures for OEMs. The TorqmotorTM Series brings the latest technology to deliver a variety of gerotor hydraulic motors for light duty, medium duty and heavy duty applications with Parker’s TG hydraulic motor, TC Series compact motor, TF clutch motor, DG high-performance parking brake motor and many more. View the complete selection of Parker Torqmotors below: 1:1 Replace of Orbital Make Hydraulic Motor Manufacturer in India
With increased power and durability, the Parker Torqmotor™ TG Series low speed high torque (LSHT) hydraulic motor is available in flange or wheel mounts. Torques to 12,600 lb-in and displacements to 58.5 cu in. Shaft sizes to 1.375-inch nominal.
The only motor in its class with roller bearings, the TE Series can handle side loads of 1500 lb and withstand the pounding delivered by chain and sprocket couplings.
The TB Series is a durable light duty hydraulic motor with up to 1-inch shaft. It can carry side loads up to 1100 pounds with intermittent pressures to 2400 psi and torques to 4700 lb-in.
The TC Series is the most compact Torqmotor™ for lighter duty applications. Sintered copper/steel bushings for side loads up to 790 lb. With intermittent pressures to 1750 psi, torques up to 2700 lb-in can be obtained. Shaft size 1 inch nominal.
The TJ Series marries the TE Series drive train with a larger, heavier duty roller bearing and shaft. This compact, economical wheel motor has intermittent pressures to 2750 psi and torques to 5700 lb-in. The shaft is 1.25 inch nominal.
Available in flange or wheel mounts, the TF Series motor has intermittent pressure ratings to 4,000 psi, torques to 8,100 lb-in. Side load capability is 4,000 lb. on flange mounts, 6,000 lb. on wheel mounts. Shaft size 1.25 inch nominal.
Get higher side-load capability up to 6000 lb. on flange mounts and 5200 lb. on wheel mounts. The TH Series motor has a 1.5 inch nominal shaft size. Torques to 13,100 lb-in and intermittent pressure up to 4000 psi.
The compact TL Series wheel motor has reduced length but still plenty of power. Intermittent pressures are 3500 psi, torques to 10,300 lb-in. Side load capacity 3600 lb. at key. Shaft size is 1.25 inch nominal.
The Torqmotor™ BG Series provides a rugged and durable spring-applied, hydraulicallyreleased parking brake, ideal for medium duty applications requiring a parking or holding brake. Intermittent pressures to 4000 psi, torques to 12,600 lb-in.
The Torqmotor™ BH Series provides a rugged and durable spring-applied, hydraulically released parking brake, ideal for medium duty applications requiring a parking or holding brake. Intermittent pressures to 4000 psi, torques to 12,600 lb-in.
The Torqmotor™ DF Series brake motor features an integrally mounted mechanical drum brake for parking. Intermittent pressures to 4000 psi, intermittent torques to 8100 lb-in, dynamic side load capability is 3600 lb at key. Shaft size 1.25 inch.
The Torqmotor™ DG Series wheel motor features an integrally mounted mechanical drum brake for parking. Intermittent pressures to 4000 psi, intermittent torques to 12,600 lb-in, dynamic side load capability is 3600 lb. at key. Shaft size 1.25 inch.
The Torqmotor™ TF Clutch Series low speed, high torque motor is ideal for applications where a freewheeling output shaft is required for some part of the duty cycle. Intermittent pressures to 4000 psi, torques to 7000 lb-in. Shaft size 1.25 inch.
The rugged TGK Series heavy duty hydraulic motor uses an extra heavy drive train in a standard size motor to deliver up to 19,000 lb-in torque, with intermittent pressure ratings to 4000 psi. Max dynamic side load capability is 3600 lb. at the key.
The largest Torqmotor, the TK Series is available in flange and wheel mounts. Torques to 23,500 lb-in, intermittent pressures to 4500 psi. Side loads to 7500 lb. on flange mounts, 9,400 lb. on wheel mounts. Shaft size 1.5-inch nominal.
Designed for use underwater or in corrosive environments, all external metal surface parts of the TS Series motor are stainless steel. Side load capacity 300 lb. Intermittent pressures to 2400 psi, torques to 2000 lb-in. Shaft is 1inch diameter.